Tile & Stone

---

Tiles come under the category of ceramics on which a great deal of advancement of technology has already taken up. As a result, the tiles and stones are once again on the trend due to their advanced technology and elegancy that it brings. It is used almost everywhere: be it the kitchen, or the bedroom and many kinds of tiles are used in the bathroom. This gives a classic look to the walls and floors.

Why tiles and stones?

---

The sturdy tiles go with anything. They are not only elegant but also have prolonged life due to their hardness and strength. Also, since most of the ceramics are artificially engineered, they are customised as per the taste of the customers. There are a different colour, different designs and patterns of which there are various permutations and combinations that can match the mood and personality you possess.

The best thing about the tiles is that they add colours to your floor that matches your personality. There are alternative colours that you can choose from a wide range of colours that are engineered in sophisticated labs.

Tiles and stones are easy to maintain and clean. It can be made wet and then can be wiped with a simple cloth to remove the stain. It also gives strong resistance against stains and scratches on the tiles and stones surface.

Care & Maintenance of the Tiles and Stones

---

Two kinds of tiles are ceramic or porcelain or stone. You can have any one of the three. They last very long. Despite its sturdiness, they still require a little care. If you maintain it regularly, then it remains beautiful for lifelong.

You should read the floor warranty manual with specific care. But for general rules, here are few instructions:

• You should sweep the floor to remove dirt and grit
• You should wipe the spill as soon as possible
• You can damp the mop with a recommended cleaner given in the instruction manual.
• The cleaner should be neutral in ph. One should not use acid, chlorines or hard basic solutions etc.
• You should give ample time to gout before you apply a sealer.

Installation of Tiles and Stones

---

Installation of tiles and stones include professional measurement on the site of the customer. One can remove the old flooring with the help of professional workers. We can do it with perfection such that your floor would start looking young once again.

What should you do before installation of the tiles?

Here are a few checklists for you so that you make sure to keep it marked before the arrival of our workers:

• Decide who would remove the old flooring. We provide a full service to remove the old flooring.
• Decide who would move the furniture from the site to another place. Our workers can take responsibility for this but you should still remove any sophisticated, expensive and fragile material on your own.
• The general rule for the right decor is that linear tile should be parallel to the window.
• Before you allow the installation, make sure you have already measured the door clearances. Please inform it beforehand such that our team experts would calibrate their tools as per the door measurements.
• You should pain anything you want beforehand as it would avoid spoiling of the tiles and stones that are new.

Having learned the checklist above, we should see what you have to do before:

• The tile should always be installed on the subfloor for greater stability and rigidity. All of this is taken by our professionals. But for your information, one should lay the cement backer first sometimes. Preparation of the subfloor is the most important step and our professionals are not only well trained but experienced as well.
• The installer will chalk out the whole plan in his mind to calculate the kind of layout you would need for the tile. You could see him using the chalk lines as a guide. All of this would be taken by our professionals but for your additional information, spaces are used between tiles. This is done so because of even placing. The mortar application is done and grout is usually applied on the next day.